我们可能会从符合条件的购买的联属合作伙伴处赚取佣金,无需额外费用。 了解更多

How to Balance pH and Total Alkalinity in a Swimming Pool

多游泳,少清洁!

How to Balance pH and Total Alkalinity in a Swimming Pool

Balance PH And Total Alkalinity

Balancing pH and Total Alkalinity (TA) might seem difficult if you’re doing it for the first time.

Beatbot AquaSense 2 Ultra

Beatbot AquaSense 2 Ultra

AquaSense 2 Ultra 是一款功能强大的 AI 驱动型五合一无线泳池清洁机器人,专为面积达 3,875 平方英尺的地下和地上泳池而设计。它能够以智能精准的方式清洁泳池的每个角落:

  • ✅ 脱脂牛奶 漂浮物 从表面
  • ✅ 磨砂膏 坚固的水线积聚
  • ✅ 攀爬和清洁 墙壁
  • ✅ 吸尘器 地板污垢和沙子
  • ✅ 澄清并增强 水体清澈度

However, this is something you can fix within a few hours if you have the right chemicals.

The most common problem is spiking pH and TA levels in pool or spa water. Having low pH and TA levels means their levels are not maintained properly or a strong acid like muriatic acid is added into the pool or spa.

Before we go further, I guess you would want to know the causes of high pH and alkalinity in your water.

最受喜爱的无线泳池清洁器:Aiper Scuba S1 无绳机器人泳池吸尘器:定时清洁、智能导航、墙壁、地板和水线清洁,适用于面积达 1,600 平方英尺的所有泳池

Causes of High pH in a Swimming Pool

1. Calcium Hypochlorite Chlorine Shock

The most common cause of high pH in a swimming pool or spa is the type of sanitizer or chlorine shock we use.

Calcium hypochlorite (cal hypo) or granular chlorine is non-stabilized chlorine that comes with high pH levels, causing high pH issues in pool and spa.

We always recommend using liquid chlorine, also known as sodium hypochlorite, to sanitize swimming pools.

Related Article: Spa and Hot Tub Maintenance: Hot tub chemicals, Cleaning hot tub and spa and filters, customize your hot tub and spa cover, and more.

Sodium hypochlorite is pH neutral since it produces hydrochloric acid and sodium hydroxide as bi-products. Hydrochloric acid naturalizes the pH produced by sodium hydroxide, helping in controling the pH levels.

If you have a saltwater pool, the chlorine generator will produce chlorine using sodium through a process called electrolysis, where the only bi-product is sodium hydroxide that has high pH levels above 13.

This explains why pH levels tend to get high in saltwater swimming pools and can only be offset by adding strong acids like muriatic or hydrochloric acid and sulfuric acid.

Related Article: Saltwater Swimming Pool Maintenance

2. High Alkalinity Levels

The second cause of high pH in a swimming pool or spa is high TA level. If you have high alkalinity levels in your pool, your pH will rise because TA acts as a pH buffer.

As such, always make sure you watch your alkalinity levels closely and use the right chemical to raise the alkalinity level in your water.

Most pool owners use soda ash, aka sodium carbonate to raise alkalinity levels in pool water. Sodium carbonate increases pH levels because it comes with a high pH of 11.3 to 11.6, which is too high if you only want to raise your TA levels and not the pH.

To increase your TA without significantly raising your pH levels, we always recommend usingsodium bicarbonate (bicarb), also known as baking soda, which comes with low pH levels compared to soda ash (sodium carbonate).

Some pool fillwater have a lot of alkalinity, and this will always significantly raise the Total Alkalinity levels in a swimming pool even without adding an alkalinity increaser.

You always need to test the total alkalinity level of your pool fillwater to make sure it is not higher than 120 ppm, which is the highest level recommended for a swimming pool to avoid pH and TA issues in your pool.

All Recommended Swimming Pool Maintenance and Cleaning Chemicals

Requirements to Balance pH and TA

1.Muriatic Acid: Muriatic or hydrochloric acid is used to decrease both pH and alkalinity when high.

2.Borax: 20 Mule Team Borax is the best option when you want to raise your pH level without increasing your TA levels.

3. Reliable Pool Chemical Test Kit: You need an accurate and reliable chemical test kit to measure the actual reading of pH and TA while adjusting their levels. One of the best isLaMotte ColorQ Pro 7, which can test pH, TA, FC, TC, CH, Cya, and Bromine.

How to Lower High pH and Total Alkalinity

If both pH and TA levels are high in your pool, you will need to addmuriatic acidslowly by slowly while testing your pH and TA levels so that you don’t get low levels.

Muriatic Acid Dosage:

1). Lowering TA Using Muriatic Acid: 0.8 qts of muriatic acid reduces TA by 10ppm in a 10,000 gallons pool.

2). Lowering pH Using Muriatic Acid: 1 qt of muriatic reduces your pH by around 10ppm in a 10,000-gallon pool.

Borax Dosage:

20 ounces of Borax increase pH in a 5000-gallon pool by 0.5.

相关产品:16000 BTU Heat Pump for Upto 5000 Gallons Above-ground Pools & Spas, Heater and Cooler with WiFi Timer, 120V

Raypak 399,000 BTU 天然气泳池加热器 – 电点火

Steps to Lower pH and TA Using Muriatic Acid

  1. Take accurate readings of TA and pH using a reliable test kit to be sure of the amount of acid your pool needs to reduce pH and TA.
  2. Dilute the right amount ofmuriatic acid depending on your pool size and levels of pH and TA. Distribute it evenly in the pool, don’t let your pH go below 7.0 to make raising it back easier.
  3. Test your pH and TA levels within 4 – 6 hours(1 complete pump run-time). If your TA is still high and pH is 7.0-7.2, raise pH back to around 7.8 by adding 20 Mule Team Borax.Borax raises pH without raising your TA.
  4. Repeat step 2 by adding more muriatic acid to lower both. You may have to repeat the process of adding borax to raise pH and adding muriatic acid to lower both pH and TA depending on your TA levels.
  5. When TA is finally balanced, raise your pH back between 7.4 and 7.6 if lower than that, and you are done fixing high pH and TA.

相关产品: CHLORWORKS 海水泳池系统氯气发生器 – 为高达 40,000 加仑的泳池提供强力氯化

Summary of Balancing pH and TA

– In any case, you get your TA levels lower than recommended levels that are between 80 and 120ppm but pH level is OK, use alkalinity increaser to raise TA back.

– If you have low pH but the TA level is OK, use borax to raise your pH without raising your TA levels.

– Use muriatic acid to lower both pH and TA when high. Use borax to help you raise pH when TA level is still high and you need to add muriatic acid so that you don’t get your pH lower than 7.0.

-Finally, it’s nearly impossible to have low pH and high TA in the same water since when TA is high, ph level will also rise very quickly. Avoid pool fillwater with high alkalinity levels because this will significantly increase the TA levels in your swimming pool, spa and hot tub, resulting in high pH levels in your pool.

相关产品: Beatbot AquaSense Cordless Robotic Pool Vacuum Cleaner for above-ground and inground pools up to 2,260 sq. ft.

zh_CNChinese