BioGuard 泳池磁铁加金属污渍去除剂和预防剂
BioGuard Pool Magnet Plus is a powerful, highly concentrated formula designed to remove and prevent metal stains caused by iron, copper, and manganese in pool water. Ideal for use with well or borehole fill water, it also clears up discolored water caused by heavy metals.
✅ Removes fresh and existing metal stains
✅ Prevents new stains from forming
✅ Perfect for pools using well water
For best results, apply monthly or whenever metals are detected. Simply pour directly into the pool, targeting stained areas. Safe and effective for all pool types.
描述
Brand: BioGuard
Beatbot AquaSense 2 Ultra

AquaSense 2 Ultra 是一款功能强大的 AI 驱动型五合一无线泳池清洁机器人,专为面积达 3,875 平方英尺的地下和地上泳池而设计。它能够以智能精准的方式清洁泳池的每个角落:
- ✅ 脱脂牛奶 漂浮物 从表面
- ✅ 磨砂膏 坚固的水线积聚
- ✅ 攀爬和清洁 墙壁
- ✅ 吸尘器 地板污垢和沙子
- ✅ 澄清并增强 水体清澈度
Description
- BioGuard Pool Magnet Plus Metal Stains Remover and Preventer comes with highly concentrated formula that clears and prevent metal stains caused by common heavy metals including iron, copper and manganese.
- BioGuard Pool Magnet Plus also clears discolored water from heavy metals.
- Aply monthly for best results when using fillwater from Well or Borehole toremove heavy metals causing stains.
Direction for Use:- BioGuard Pool Magnet Plus:
- Add 1 quart of Pool Magnet Plus for every 10,000 gallons of water per 1ppm of metals. You can measure metal level in your pool water using accurate test kit such as LaMotte ColorQ Pro 11 that measures heavy metals level including Copper and Iron.
- Measure the correct amount of BioGuard Pool Magnet Plus and add directly to your swimming pool targeting areas with metal stains, remember the maximum recommended does is 3 quarts per 10,000 gallons of water.
For Maintenance: If your pool fillwatercontains heavy metals, add 3 fluid ounces per 1,000 gallons of water to remove metals and prevent metal stains when chlorine is added to pool or when pH level goes higher.
For Removal of Fresh Stains:
- Turn the pump off and pour 1-3 quarts of Pool Magnet Plus to your pool depending on the level of metal stains, target areas with metal stains
- Leave the pump off for 8 hours. Turn the pump on after 8 hours and let the water circulate for 7 days before swimming.