BioGuard Pool Magnet Plus Metal Stains Remover and Preventer - Thesummerpools.com
BioGuard

BioGuard Pool Magnet Plus Metal Stains Remover and Preventer

View on Amazon

Brand: BioGuard

Description:

  • BioGuard Pool Magnet Plus Metal Stains Remover and Preventer comes with highly concentrated formula that clears and prevent metal stains caused by common heavy metals including iron, copper and manganese.
  • BioGuard Pool Magnet Plus also clears discolored water from heavy metals.
  • Aply monthly for best results when using fillwater from Well or Borehole toremove heavy metals causing stains.

Direction for Use:- BioGuard Pool Magnet Plus:

  • Add 1 quart of Pool Magnet Plus for every 10,000 gallons of water per 1ppm of metals. You can measure metal level in your pool water using accurate test kit such as LaMotte ColorQ Pro 11 that measures heavy metals level including Copper and Iron.
  • Measure the correct amount of BioGuard Pool Magnet Plus and add directly to your swimming pool targeting areas with metal stains, remember the maximum recommended does is 3 quarts per 10,000 gallons of water.
For Maintenance: If your pool fillwater contains heavy metals, add 3 fluid ounces per 1,000 gallons of water to remove metals and prevent metal stains when chlorine is added to pool or when pH level goes higher.

 

For Removal of Fresh Stains:

  • Turn the pump off and pour 1-3 quarts of Pool Magnet Plus to your pool depending on the level of metal stains, target areas with metal stains
  • Leave the pump off for 8 hours. Turn the pump on after 8 hours and let the water circulate for 7 days before swimming.